ThatSupraGuy Posted December 23, 2019 Report Posted December 23, 2019 Hi there. Just wondering if it's possible to wire an AEM x series wide band into my supra link pnp using an expansion loom? Thanks Quote
Adamw Posted December 23, 2019 Report Posted December 23, 2019 There are two options for connecting an X-series to a Link ECU, either CAN bus or conventional analog 0-5V. CAN bus is typically more accurate than analog. You can only connect to analog with an expansion loom, connect the AEM "analog +" wire to any AN Volt input, connect the AEM "analog -" to the sensor ground. To connect via CAN bus instead of analog you will need a CANPCB cable and CANF plug. Quote
ThatSupraGuy Posted December 26, 2019 Author Report Posted December 26, 2019 Awesome thanks for your help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.