Rbmadhead Posted February 21, 2020 Report Share Posted February 21, 2020 Hi got a vipec ecu and trying to figure out which model I have on the board is says evo 4-8 bb v1.2 many help appreciated Quote Link to comment Share on other sites More sharing options...
Rbmadhead Posted February 21, 2020 Author Report Share Posted February 21, 2020 Hi just purchased a vipec and these are the number evo 4-8 bb v1.2 is this a v series and what is the correct software to download thanks for any help Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 21, 2020 Report Share Posted February 21, 2020 Can you add a better photo of the serial number (or just type it here), cant read the photo at all. Quote Link to comment Share on other sites More sharing options...
Rbmadhead Posted February 21, 2020 Author Report Share Posted February 21, 2020 The serial number is pcb rev 1.1 Serial #15797 hoe this helps Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 21, 2020 Report Share Posted February 21, 2020 That is a Vipec V88 based plugin. It has built-in knock control and a few more inputs and outputs compared to the earlier V44 based plugins. Download VTS software V4.10.2 from the Vipec website. https://www.vi-pec.com/software/vts-v4-10-2.1784 Quote Link to comment Share on other sites More sharing options...
Rbmadhead Posted February 21, 2020 Author Report Share Posted February 21, 2020 Thanks that great help Is the v88 available as board only as can only find it in a metal case like this on website cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 22, 2020 Report Share Posted February 22, 2020 The V88 was a wire-in ecu, but the Vipec plug-in ECU was based on the same hardware. The main hardware difference is the plug-in didnt get the peak & hold inj drives. Yours is a plug-in ECU for an Evo IV-VIII Quote Link to comment Share on other sites More sharing options...
Rbmadhead Posted February 22, 2020 Author Report Share Posted February 22, 2020 Thanks pal great info I’ll download software now cheers Quote Link to comment Share on other sites More sharing options...
paulr33 Posted February 28, 2020 Report Share Posted February 28, 2020 Make sure you check what ECU plug type you have in the car as some evo 8’s have 3 pin block and some have 4 pin blocks. For example, my evo 8 runs the evo 9 vipec because of the plug layout. I think it’s 3 pin blocks whereas the one you have is 4 pin blocks so check what your car has if it’s an evo 8 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.