tsefung124 Posted March 27, 2020 Report Share Posted March 27, 2020 I purchased JZX100 G4+ PUNGIN ECU But it seems that asub error occurred during the setting After restoring the factory setting the engine willnot start. Isthere an error in the Baser Maps? Are there any factory-provided Base Maps?thanks! Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 27, 2020 Report Share Posted March 27, 2020 Restore to factory settings basically wipes all settings and loads default values, so it will not be configured for your engine at all after doing that. Did you save a copy of the map it had in it before doing the restore? I dont have a copy of the JZX100 base map myself. If you have a copy then please attach and I will take a look at what is causing the error. If you dont have a copy then I would suggest you email [email protected] and they will probably be able to get you something on Monday. Quote Link to comment Share on other sites More sharing options...
tsefung124 Posted March 29, 2020 Author Report Share Posted March 29, 2020 This is modified with the 1JZ VVTI MAP of other ECU models, so is it possible to start another engine? JZX100 1JZ VVTI G4+.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 29, 2020 Report Share Posted March 29, 2020 That map you attached is from an Xtreme wire-in ECU, not a plug-in. I have made some adjustments to make it work in a plug-in ECU. You will need to update to the latest firmware to be able to use this map. JZX100 Plug-in.pclr Quote Link to comment Share on other sites More sharing options...
tsefung124 Posted March 29, 2020 Author Report Share Posted March 29, 2020 thank you for your help! but AN V11 at 5V How should it be set Quote Link to comment Share on other sites More sharing options...
Simon Posted March 29, 2020 Report Share Posted March 29, 2020 AN volt 11 is the map signal in the file Adam sent. Once you have loaded the file to your ECU clear the errors and see if it returns. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.