Guysi Posted June 14, 2020 Report Share Posted June 14, 2020 Hello I have 2 questions about contacting the oil temp sensor to the ecu, I'll hope someone here can help me.. 1. I installed aem temp sensor and now I need to contact it to the expansion loom, I have the diagram so I know where to contact it but what I need to do after? How I create temp alerts? 2. My tuner looked the ecu with password so I want to know if I need him for this process - contacting the sensor to the ecu as I ask above? My car is Impreza 00 classic with link g4 plus. Thank you Guy Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 14, 2020 Report Share Posted June 14, 2020 Yes, you will need access to the map to turn on the correct input, assign a calibration and set up any safety or protection strategies. Quote Link to comment Share on other sites More sharing options...
Guysi Posted June 22, 2020 Author Report Share Posted June 22, 2020 Hi again, There is a guide that shows how to set a new gauge sensor on my tablet layer? I connected a new temp sensor and I want to add it to my screen. Thank you Quote Link to comment Share on other sites More sharing options...
Guysi Posted June 29, 2020 Author Report Share Posted June 29, 2020 sorry for asking again but I can not calibrate the temp sensor. there is a step by step guide? I wired the sensor to AN TEMP 3 and now I don't know what to chose in the sensor type? there is no AEM at the list. If I need to custom calibrate it, how can I do it? I tried to set CAL table 7 but the result make no sense, the temp is minus.. one more thing, at the Configuration page there is a table with all the analog inputs, if AN3 shows 0.48 it's ok? just to know that I wire the sensor correctly. I hope someone here could help me, I didn't know this is so complicated . thank you very much Guy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.