JKauh Posted July 13, 2020 Report Share Posted July 13, 2020 Hello! I have a VK56 with a 12 tooth crank mounted trigger wheel with no missing teeth. When viewing the runtime values while cranking I am getting RPM and Trig 1 & 2 Signals both say 'Yes' but I am getting Trig 1 error counts. The trigger scope for the cam is showing a 1-3-4-2 pattern. Will i need to modify the cam so there is only 1 tooth? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 13, 2020 Report Share Posted July 13, 2020 Yes, for sequential with a 12 evenly spaced tooth crank wheel you will need a single tooth on the cam. if you want to run the stock 10 tooth cam you will have to run the matching 36-1-1 pattern on the crank. Or you could grind one tooth off the crank wheel to make it 12-1 and run it wasted spark without a cam sensor at all. Quote Link to comment Share on other sites More sharing options...
JKauh Posted July 16, 2020 Author Report Share Posted July 16, 2020 Thanks for the help! Ground the teeth on the cam down and error counts went away! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.