Knox Posted August 16, 2020 Report Share Posted August 16, 2020 Hello, yesterday I sold my evo 4-8 ethrottle plugin ecu to evo 8 (my car is evo6). I upload the base calibration into the ecu and changed the trigger mode to evo 7-9. Map sensor and tps sensor calibrated but engine didn’t start. I make test to injectors and coils and they are working. Trigger 1 and 2 are yes on cranking and no trig error. Evo 8 is european market version. Is there any jumper or setting I need to check ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 16, 2020 Report Share Posted August 16, 2020 No it should still run without changing any jumpers. The jumpers only effect the intercooler water spray and the cat converter lamp. Some odd models have the AC clutch and FP Relay pins swapped. Do you hear the fuel pump prime when you first turn the ignition on? If not then try setting Ign 3 to " test (ON)" to see if the fuel pump runs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.