Babych44 Posted August 17, 2020 Report Share Posted August 17, 2020 I have tried to put cll settings so that it does not adjust when in overrun areas (below map 35) but still it sometimes does that like in attached picture. I uploadet base map, but log was too big for uploading here :( Does Adamw know why it does that? 16.8 cll pos ja neg säätöjä muutettu, afr target tablea muokattu myös.pclr Heres CLL trim limits Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 17, 2020 Author Report Share Posted August 17, 2020 https://drive.google.com/file/d/1dmBQNIPECZwTRuev-q7Cm1VXswPYG8Er/view?usp=sharing Link to log if its needed Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 17, 2020 Report Share Posted August 17, 2020 Yeah, from the look of your screenshot it is not always behaving correctly. Before I look at it closer can you update to the latest firmware and do a new log as there were a couple of changes to CLL but I dont remember what they addressed. Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 18, 2020 Author Report Share Posted August 18, 2020 5 hours ago, Adamw said: Yeah, from the look of your screenshot it is not always behaving correctly. Before I look at it closer can you update to the latest firmware and do a new log as there were a couple of changes to CLL but I dont remember what they addressed. I will do that, thanks Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 18, 2020 Author Report Share Posted August 18, 2020 Still seems to do it. I guess putting CLL update rate higher might help a little but still dont understand why it does that 18.8 uus firmis.pclr 18.8 cruising.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 19, 2020 Report Share Posted August 19, 2020 Your files show you are still on an older 5.6.6 firmware. Can you update to the latest 5.6.7.3631. Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 19, 2020 Author Report Share Posted August 19, 2020 I updated yesterday for newest version 6.6.7.3632 before taking logs Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 19, 2020 Report Share Posted August 19, 2020 That is the PC Link software, not the ECU firmware. You need to connect to the ecu and go to >ecu controls>update firmware. Here is what you map and log show: Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 19, 2020 Author Report Share Posted August 19, 2020 Oh fuck, I will do that today Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 19, 2020 Author Report Share Posted August 19, 2020 Now finally firmware is ok too, still it does that sometimes https://drive.google.com/file/d/1oMR6xotTixHt3kzhNBT5AutWY6Prxby2/view?usp=sharing log here 19.8 test.pclr Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 22, 2020 Author Report Share Posted August 22, 2020 Adamw? Quote Link to comment Share on other sites More sharing options...
Babych44 Posted August 25, 2020 Author Report Share Posted August 25, 2020 up Adamw? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 27, 2020 Report Share Posted August 27, 2020 Sorry for the slow reply. Yes, it looks like a bug. I will pass it on to engineering. Babych44 and SchuKingR 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.