Sattheera Posted September 9, 2020 Report Share Posted September 9, 2020 I want to know how to control vvti for 2TR-FE Which it works with 5V power supply Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 9, 2020 Report Share Posted September 9, 2020 What makes you think it is 5V? Your schematic shows a traditional solenoid so it is far more likely powered by battery voltage (~14V). Sattheera 1 Quote Link to comment Share on other sites More sharing options...
Sattheera Posted September 9, 2020 Author Report Share Posted September 9, 2020 This pic show wave form for VVTI Solinoid. I am not sure. Quote Link to comment Share on other sites More sharing options...
dx4picco Posted September 9, 2020 Report Share Posted September 9, 2020 I assume they are speaking about 5V per division when checking the Signal on an Osciloscope, debuging purpose. And not that signal himself is 5v. Sattheera 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 9, 2020 Report Share Posted September 9, 2020 Yep, 5V per division is for measuring the signal with an oscilloscope. Connect ignition switched +12V to one side of the solenoid and the other side to an aux output. Sattheera 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.