Jump to content

AC Clutch at Fault on cranking - HC96X


Recommended Posts

Hi everyone! A new comer here for some advise.

Was setting up base map for a B18c on a HC96x yesterday. First start up was well on the first goal, AC request pull up resistor turned on to prevent clutch engagement to disturbing idle and trigger offset is calibrated. Thought everything is good so I left the car overnight after a few more cranks. 

When I get back on working the car today the car is not starting like it should the day before - settings remained unchanged and it sounded like the firing is off. So I linked the ECU with PClink to check if there are any fault codes or need to work on cold start enrichment. Fuel Pump, injectors is active when cranking; voltage is ~10V (12.2 on static). Only thing I spot out for now is AC Clutch status is faulty while cranking (please find photo attached). Could someone please give me some suggestions on the current situation? Much appreciate for the help! 

Kind Regards,


IMG-2810 (1).PNG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...