Jump to content

dual park/neutral switchs


cwhite951

Recommended Posts

I am working on a track car set up with push button start/stop. I am including park/neutral signal as a safety - the catch is that I am including a remote start/stop button in the engine compartment with a clutch 'over ride' button since I can't work the clutch pedal if I have my head in the engine bay!

sounded pretty easy until the clutch pedal sensor is normally on and the engine bay button is normally off. I set them up as separate park/neutral sensors but it appears that the software will only listed on one park/neutral channel.

 

any great ideas on how to set this up?

Link to comment
Share on other sites

well it sounded nice but it does not work. with the anti theft it still spins the engine but does not have spark / fuel. 

looks like i will have to go with the hard wired option and change the override switch in the engine compartment to a momentary normally on button and put it in series with the clutch switch.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...