GrgG Posted October 23, 2020 Report Share Posted October 23, 2020 I have a bmw s38 engine turbocharged i want to have the fast rpm limiter like drift cars Quote Link to comment Share on other sites More sharing options...
M1tch Posted October 23, 2020 Report Share Posted October 23, 2020 There is a good help file that you can easily find in the PC link software - there are some different limit modes for both hard and soft limits. Quote Link to comment Share on other sites More sharing options...
GrgG Posted October 23, 2020 Author Report Share Posted October 23, 2020 I tried many settings it diidnt work for me My fuel setup is multi point group Quote Link to comment Share on other sites More sharing options...
EvocentriK Posted November 19, 2020 Report Share Posted November 19, 2020 Yeah those settings are a bit wacky. For an RPM limit you probably want to start with something like 60% cut and end at 90% cut across a control range of something like 200 rpm. If you set the cut effect to constant instead of adaptive you will have a much faster cut effect but it's harder on the valvetrain especially as it doesn't share the cut between cylinders so be careful, especially on engines that don't like aggressive cuts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.