Oldmanz350 Posted October 29, 2020 Report Share Posted October 29, 2020 Hi, I have a Link G4X Plug & Play for 350Z using Stock Knock Sensor. What is the correct Frequency Channel when using the Stock Knock Sensor? Thank You, Tim Quote Link to comment Share on other sites More sharing options...
Oldmanz350 Posted October 30, 2020 Author Report Share Posted October 30, 2020 OK, so it's 6 kHz Is it a Narrow or Wide Band Stock Knock Sensor? Thank You, Tim Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 31, 2020 Report Share Posted October 31, 2020 I dont know sorry, best to make it knock and see which frequency gives you the best signal to noise ratio. Quote Link to comment Share on other sites More sharing options...
Electredge Posted November 1, 2020 Report Share Posted November 1, 2020 On 10/30/2020 at 9:23 AM, Oldmanz350 said: OK, so it's 6 kHz Is it a Narrow or Wide Band Stock Knock Sensor? Thank You, Tim If your trying to pick a frequency to start with I'd suggest starting around 12 kHz but Adam is right you need to induce knock and then monitor which frequency is strongest when its actually knocking Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.