aquinas Posted January 5, 2021 Report Posted January 5, 2021 Hi I was wondering I have a g4+ I have a link map sensor can I use the factory map sensor wiring? Its on a 95 wrx v1-v2 also I'm using a gfb boost controller I understand I can use the g4+ for boost control I have an expansion loom coming do I wire the 3port using the loom? I'm jst trying to do as much as I can I hope this hasnt been asked before I did a search but couldn't find what I wanted Quote
timslib Posted January 5, 2021 Report Posted January 5, 2021 Hey man, As far as I understand re: MAP sensor, you can replace your existing MAP sensor with a new one using the same wiring (obviously, make sure the Vin, gnd and Vout are wired correctly, lol). Quote
Adamw Posted January 5, 2021 Report Posted January 5, 2021 Yes as per Timmy's comment, swap your factory MAP sensor connector and use any in its place. Same with your boost solenoid - usually easiest just to wire the new one in place of the old one. timslib 1 Quote
aquinas Posted January 5, 2021 Author Report Posted January 5, 2021 O thank you can free up the expansion loom for something else Quote
aquinas Posted January 9, 2021 Author Report Posted January 9, 2021 So I dont need the birds nest of sensors on the bracket do I? the map sensor will be sweet as? I mean the pressure sensor and the 2 others I cant think of the name of jst so many hoses lol Quote
Adamw Posted January 9, 2021 Report Posted January 9, 2021 Sorry I have no idea what you are on about. You might have to attach a photo or something. Quote
aquinas Posted January 9, 2021 Author Report Posted January 9, 2021 https://images.app.goo.gl/A4iD45aEDXQZupfN7 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.