Rbeetle40 Posted January 7, 2021 Report Share Posted January 7, 2021 So I have a rb25 using a fury ecu I just got to test everything and all spark and injectors tested up fine But when cranking I loose spark I took the cas off and turned by hand and I can hear the injectors clicking but no spark (had a dummy plug in 2 coils to check) The ecu is receiving both triggers correctly weather they are set up correctly I dont know as its just on a base map but trigger 1 and 2 are working I checked the safety features (ignition cut etc and they are off) Any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 8, 2021 Report Share Posted January 8, 2021 Can you attach the tune and a log of it cranking. Quote Link to comment Share on other sites More sharing options...
Rbeetle40 Posted January 9, 2021 Author Report Share Posted January 9, 2021 On 1/8/2021 at 3:56 AM, Adamw said: Can you attach the tune and a log of it cranking. It was the trigger wheel thought it was standard but turned out to already have a aem unit inside ... its now sparking too but still can't get it to start Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 10, 2021 Report Share Posted January 10, 2021 On 1/8/2021 at 4:56 PM, Adamw said: Can you attach the tune and a log of it cranking. Quote Link to comment Share on other sites More sharing options...
Rbeetle40 Posted January 15, 2021 Author Report Share Posted January 15, 2021 Sorry its taken so long I got covid and have been pretty unwell just got out in the garage today to get the log data to upload to link website.llgx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.