Tables not allowing axis to be changed

[Electredge]

I've noticed the following tables I cannot change the axis data points. 

crank enrich table

crank hold table

post start enrich table

post start hold time table

post start decay time table

Is this some kind of glitch? or is this on purpose? 

Thanks

Jon

[Adamw]

It is by design.  Many of the small tables that almost every user will need and usually dont need much variation from the default axes are done this way as user configurable axes increases the processor load significantly as the interpolation gets much more complex.  This is why there is a limit of 45 GP tables.  

If you want configurable axes on any of these functions you need to turn on the 3D option.  Those 2 related tables will then become part of your 45 GP table allowance.

 

 

[Electredge]

thank adam, that makes sense I was just trying to make the table smaller. for crank enrich and post start enrich it seems to have very small gaps between the temps, which makes the table very long. especially the 266 and 284 degree temps which hopefully the cars will never see :D...