POWERPLUS Posted March 24, 2021 Report Share Posted March 24, 2021 I use Xtream for MAZDA DEMIO. It has ZY-VE 1.5Lengine. I use trigger mode MAZDA3. Does it correct? Toshinori Iijima Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 24, 2021 Report Share Posted March 24, 2021 Yes, that looks like a match for Mazda 3vtc trigger mode. Quote Link to comment Share on other sites More sharing options...
POWERPLUS Posted March 24, 2021 Author Report Share Posted March 24, 2021 Thank you for your prompy reply. I have a problem about power. Already, Engine is run and looks good for hi RPM, but very low power compare to normal ECU. (A/F tuned 12.5 to 13, and Spark advance MAX is 28deg.) I set trigger offset 324degree, does it looks OK? I have strange for this. MX5 VVTi trigger mode set is much better? What do you think? and if you have any Idea for Power, please advice. Toshinori Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 25, 2021 Report Share Posted March 25, 2021 I have no idea what the trigger offset is sorry, you need to confirm that with a timing light. 2 hours ago, POWERPLUS JAPAN said: MX5 VVTi trigger mode set is much better? The MX5 VVT mode is not suitable, the MX5 only has 4 teeth on the crankshaft, yours has 36-2-2-2 Quote Link to comment Share on other sites More sharing options...
Electredge Posted March 25, 2021 Report Share Posted March 25, 2021 Adam.... normally I see trigger offset between 0-10 for the vvt setups... most recently I think it landed at 4 Quote Link to comment Share on other sites More sharing options...
POWERPLUS Posted March 25, 2021 Author Report Share Posted March 25, 2021 Thanks a lot. I will try again trigger set up. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 25, 2021 Report Share Posted March 25, 2021 6 hours ago, Electredge said: Adam.... normally I see trigger offset between 0-10 for the vvt setups... most recently I think it landed at 4 Was that using the Mazda 3 mode though - or are you talking about the MX5 vvt mode? Quote Link to comment Share on other sites More sharing options...
Electredge Posted March 25, 2021 Report Share Posted March 25, 2021 9 hours ago, Adamw said: Was that using the Mazda 3 mode though - or are you talking about the MX5 vvt mode? MX5 vvt, sorry didn't realize it was the MZR engine Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 31, 2021 Report Share Posted March 31, 2021 Yes your trigger matches the Mazda 3 mode. I have no idea about the offset, but provided your ignition timing shows 10deg at both low RPM and high RPM when the timing is locked to 10 then your offset is correct. Quote Link to comment Share on other sites More sharing options...
POWERPLUS Posted March 31, 2021 Author Report Share Posted March 31, 2021 Thank you! I will check everything again. regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.