mrpav Posted April 20, 2021 Report Share Posted April 20, 2021 Hey guys asking for a friend so sorry if potato, but is there a quick way to do percentage increases of a selected area on a fuel map etc. On the Haltech for example you group a bunch of cells, hit ‘P’ then 10 and enter to increase by 10%. Cheers Quote Link to comment Share on other sites More sharing options...
dx4picco Posted April 20, 2021 Report Share Posted April 20, 2021 Use the multiply (*) then type 1.1 to get 10% increase or 0.9 to get 10%decrease mrpav 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2021 Report Share Posted April 20, 2021 In G4 most of the operators are shown on the pop up where you enter the value. So to add 15% you just type "+15%". To select more than one cell you shift>arrow. In G4+ selection of multiple cells is a bit easier, you can shift>arrow or click and drag or for the whole table click the top left corner. All the same operators work. mrpav and JeremiahJ 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.