pagie84a Posted September 21, 2021 Author Report Share Posted September 21, 2021 5 hours ago, Adamw said: You have 20ms of injector pulse width showing in the log, so there should be plenty of fuel going in. Do the injectors click if you put them in test mode? Yes all 8 Tried flipping the trigger offset round 360 but same result Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 21, 2021 Report Share Posted September 21, 2021 If it runs with starter fluid, then the offset is already correct. It can only be a fuel problem. You said you have fuel pressure earlier, but in your last log it only shows 120kpa when cranking. It should normally be more like 300kpa. Quote Link to comment Share on other sites More sharing options...
pagie84a Posted September 21, 2021 Author Report Share Posted September 21, 2021 2 hours ago, Adamw said: If it runs with starter fluid, then the offset is already correct. It can only be a fuel problem. You said you have fuel pressure earlier, but in your last log it only shows 120kpa when cranking. It should normally be more like 300kpa. I assumed that was calibration issue as the oil press is same sensor and showing same results Ill check lines and pump Quote Link to comment Share on other sites More sharing options...
pagie84a Posted September 24, 2021 Author Report Share Posted September 24, 2021 Was a fuel pressure issue it starts and runs now thankyou gor your help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.