Turbo.Tim Posted July 23, 2021 Report Share Posted July 23, 2021 Hello, I am new to Link. I just picked up a Link G4+ plug and play for my 2003 Evo 8. I was previously tuned on open source. With my open source tune I was able to log ARF using my AEM wideband that was wired directly into the rear 02. When I try to configure Lambda 1 or 2 I see analog 1-12. Am I able to select where it is currently wired or will I need to move it to the expansion loom? Also how do i ensure Lambda 1 is the front 02? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 23, 2021 Report Share Posted July 23, 2021 Front 02 is AN Volt 4 (pin 76), the rear 02 is not connected to any input in our ECU. You will have to move the wideband wire to the front 02 pin or you can use one of the spare AN Volt pins such as Air flow meter on pin 90 (ANV2) or the MAP on pin 73 (ANV8), or one on the expansion port. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.