ALPerf Posted July 29, 2021 Report Share Posted July 29, 2021 Hi all First time setup on sequential gearbox with dbw, I've had no issue setting up flat shift but I'm struggling with auto blip, unsure of what to input for blip solenoid with e throttle Many thanks Adam TOYOTA 2JZ S15 1050X E THROT GTX37R DYNO VVT CHANGE FLAT SHIFT.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 29, 2021 Report Share Posted July 29, 2021 You only assign a blip solenoid if there is in fact a solenoid. If you want E-throttle to do the blip then leave solenoid set to none and throw about 30% in the "Over-run Down Shift Throttle Trim" table as a starting point (this is how much the throttle opens for the blip). Also set the drive/overuun TP quite a bit higher - usually around 20% Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.