HELP 2JZ Trigger NON VVT CAM, VVTI Crank!

[Exige]

Hello, 

please tell me correct settings to run 2JZ non VVTI Head / CAM with VVTI 36-2 trigger to run sequential mode.

thanks in advance

basemap_misfire.pclr Trigger Scope Log 2021-08-6 2;43;19 pm.llg

[Adamw]

Setup below.  Note your cam sensor is wired incorrect polarity, swap the +/- wires at the sensor plug.

 

[Exige]

switched polarity, with those settings car is running on misfire all outputs of ignition and injectors are correct - checked one by one and tested outputs.
then i wired to wasted spark and group injection - engine runs smooth and great with trigger 1 only.

 

[Adamw]

What make you believe you have a trigger problem?  Are there trigger errors being reported?  Is RPM and dwell stable?  Attach a log and the tune.