Josht Posted August 17, 2021 Report Posted August 17, 2021 Iv jus installed a set of sard top feed injectors into my 3sgte, however I can’t find any data for dwell times and short pulse width adders. has anyone used them before? The cars at the mappers now so desperately need some info. Quote
Adamw Posted August 17, 2021 Report Posted August 17, 2021 It is unlikely you will find any correct info for those since they are low impedance. Their deadtimes will be highly influenced by the ballast resistor that is fitted so it will be application specific. There are several methods the tuner can use to validate deadtimes, and assuming your car has an alternator with reasonably well controlled battery voltage then it doesnt matter much if tuning in traditional equation anyhow. Josht 1 Quote
rrob Posted August 18, 2021 Report Posted August 18, 2021 Those dead times are nowhere close. 0.5ms was closer, but id have to check the file. Josht 1 Quote
Josht Posted August 19, 2021 Author Report Posted August 19, 2021 19 hours ago, rrob said: Those dead times are nowhere close. 0.5ms was closer, but id have to check the file. Hi rob, Do you have any data on them? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.