Gregconboy158 Posted August 20, 2021 Report Share Posted August 20, 2021 Nearly finished repinning my 95 link pnp to the k series, is there a basemap available that I can use at all to get it up and running? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 20, 2021 Report Share Posted August 20, 2021 This will be pretty close, change the trigger mode to K20 VTC should be the main change needed. Honda k24a3 vvt.pclr Quote Link to comment Share on other sites More sharing options...
Gregconboy158 Posted August 21, 2021 Author Report Share Posted August 21, 2021 Thanks Adam will check that out later, I've actually got a k24a3 engine with k20 vtc gear and cams, will I need to change the trigger mode still? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 21, 2021 Report Share Posted August 21, 2021 The main difference between the K20 & 24 as far as I know is the crank sensor. The wiring is different and the waveform is inverted. So, if you have the K24 crank sensor, you will likely need the K24 trigger mode, if you have a K20 crank sensor it will likely need K20 trigger mode. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.