Reemen Posted September 3, 2021 Report Share Posted September 3, 2021 I get two errors on my lambda sensor: 16 Heated to long and33 Open Circuit APE-IPE' i can see the temp going from 300-600 while heating How do i fix this=? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 3, 2021 Report Share Posted September 3, 2021 Error 16 and 33 are usually power supply related. Either the wires are too small or it is connected to a voltage source with significant inductive noise. Move the power wires to their own dedicated relay close to the battery, or try the capacitor as per the alternative diagram in the quickstart guide. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.