Gregconboy158 Posted September 5, 2021 Report Share Posted September 5, 2021 I'm just in the process of starting up my honda k24 engine, the basemap I've got is for modelled fuel where as my old b series was always traditional. Is it a worthwhile upgrade? What requirements do I need to use modelled and whats the benefits over traditional? Quote Link to comment Share on other sites More sharing options...
INSW20 Posted September 5, 2021 Report Share Posted September 5, 2021 My old AEM series 1 was traditional, my G4+ runs modeled and it's so much better in almost every way I can think of. Absolutely would recommend making the change. Just make SURE all of your base settings are correct, like injector and engine info, fuel properties, etc... Quote Link to comment Share on other sites More sharing options...
Gregconboy158 Posted September 6, 2021 Author Report Share Posted September 6, 2021 I'm using the stock k24 injectors so I've got the dead times for them but not the short pulse width. Will this be a problem? Have a fuel pressure sensor too. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 6, 2021 Report Share Posted September 6, 2021 SWPA is not needed for relatively small injectors. Once you get over about 1200cc on petrol it becomes more important. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.