marlono1 Posted September 10, 2021 Report Share Posted September 10, 2021 Hi guys, Need a Base map for Blacktop 4age 20v with 1nz COP, TPS, no MAP sensor. Atom ECU Admin could u move this to G4x Side? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 10, 2021 Report Share Posted September 10, 2021 Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 9, 2021 Author Report Share Posted October 9, 2021 Hi after I connected the harness I am able to to test all my sensors thru the ecu to see that they work except vvti. However my car cranks but it won't start. Is there anything I can do to see what might be causing the car not to start. I Have a gauge for the fuel pump and I see pressure. I was not able to activate vvti and I am not sure if that would be the cause to why the car won't start. Also how do I test trigger 1 and 2? When I check voltage I see around 3.5 volts I think I can't recall the value exact haha Using the same file u provided only thing I adjust was AUX 1-4 1. VVTI 2.Electric fan 3. Tacho since ita digital. 4 fuel pump Any advice to trouble shoot would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 9, 2021 Report Share Posted October 9, 2021 Please do a short log of it cranking and attach that and a copy of your tune. Also, do a trigger scope while cranking. >ECU Controls>trigger scope. Click the capture button while the engine is cranking. Save and attach the file. Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 10, 2021 Author Report Share Posted October 10, 2021 here are the logs, is trigger 2 not working? I didn't see a signal under the capture for it? Added trigerscope log ecu log during cranking(2 logs) current map installed on ECU 10_9_2021_TriggerScopeLog.llgx 10-9-2021_4age20v.pclx ECU Log 2021-10-9 10;50;13 pm.llgx ECU Log 2021-10-9 10;51;20 pm.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 10, 2021 Report Share Posted October 10, 2021 Sorry, the trigger is set up incorrectly in that map, try the one below. New 4age20v.pclx Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 10, 2021 Author Report Share Posted October 10, 2021 No luck after uploading new file. Same results here is another triggerscope and ecu log ECU Log 2021-10-10 12;35;36 pm.llgx TriggerScopeLog10_10_2021.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 10, 2021 Report Share Posted October 10, 2021 What do you mean by "no luck"? Your trigger scope suggests the ECU is happy. Can you do a PC log instead of ECU log, you have basically recorded nothing useful. Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 10, 2021 Author Report Share Posted October 10, 2021 How do I record a pc log. The car only cranked but no start whatsoever. Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 11, 2021 Author Report Share Posted October 11, 2021 here it is PC Datalog - 2021-10-10 8;54;57 pm.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 11, 2021 Report Share Posted October 11, 2021 None of your sensors are working, this should have been the first thing you confirm even before you attempt to start. MAP is reading 0 TPS is reading 50% ECT is reading 95Deg C IAT is reading 130Deg C. Fix all of those then try again. Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 11, 2021 Author Report Share Posted October 11, 2021 No map sensor installed as mentioned initially. tuner mentioned it shouldn't be problem I tried the TPS and i see the voltage change when I move the throttle cable from the live data. I will test the ECT and test the IAT and see if the readings are coming in the live data. Quote Link to comment Share on other sites More sharing options...
marlono1 Posted October 14, 2021 Author Report Share Posted October 14, 2021 its always the simple things, turns out i didnt assign each sensor to the correct configuration. Thanks admin for the assistance Quote Link to comment Share on other sites More sharing options...
jonvagis Posted October 9, 2023 Report Share Posted October 9, 2023 Adamw could you upload again the base map ? Quote Link to comment Share on other sites More sharing options...
essb00 Posted October 10, 2023 Report Share Posted October 10, 2023 3 hours ago, jonvagis said: Adamw could you upload again the base map ? It is still in the link posted by Adamw in September 10, 2021 https://forums.linkecu.com/topic/12663-4age-blacktop-20v-with-cop-start-up-nap/ Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 10, 2023 Report Share Posted October 10, 2023 4 hours ago, jonvagis said: Adamw could you upload again the base map ? If it says "not available" that would be because you haven't logged in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.