Gtech performance Posted September 20, 2021 Report Share Posted September 20, 2021 Hi guys I was wondering if anyone can send me a diagram of how I can wire up the thunder to a vl RB 30 crank angle sensor. Wiring diagrams, pin outs etc. Also can I load a vl map from a g4+ extreme into the thunder? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 20, 2021 Report Share Posted September 20, 2021 Yes you can load the VL base map in to the Thunder, it will get converted to have all Thunder features when you load it into an ECU. The dizzy pinout below, take note of the position of the keys on the plug and hold yours to match this picture, from memory the VH45 one is upside down compared to the RB. "CAS Supply" can use the Thunder 8V wire. Quote Link to comment Share on other sites More sharing options...
Gtech performance Posted September 20, 2021 Author Report Share Posted September 20, 2021 Hi Andrew Thanks heaps for your help mate. Just a quick one, the sensor ground, can I use the other wire in the shielded cable or a seperate ground? Thanks again Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 20, 2021 Report Share Posted September 20, 2021 Yes, the white wires in the shielded cables are sensor ground. Kevin Tyler 1 Quote Link to comment Share on other sites More sharing options...
Gtech performance Posted September 21, 2021 Author Report Share Posted September 21, 2021 Hi Adam thanks again mate your a champ Il let you know how I go Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.