senordos Posted September 23, 2021 Report Posted September 23, 2021 Hi, Is it possible to change the output of the ignition points. We've a customer who's wired in their Link, but they've wired Inj 1 and Inj 2 the wrong way. Can we change this in the Link software or do we need to re-pin. It's on a "plug and play", so a bit more difficult to de-pin. Cheers! Quote
Adamw Posted September 23, 2021 Report Posted September 23, 2021 What engine? And do you mean ignition or injection? Quote
senordos Posted September 25, 2021 Author Report Posted September 25, 2021 Hi Adam, 3SGTE MR2. it’s the injectors. It’s on a distributor for ignition. Cheers! Quote
Adamw Posted September 25, 2021 Report Posted September 25, 2021 Since you have a distributor you could just change the firing order setting to change the sequence of the injectors. Quote
senordos Posted September 26, 2021 Author Report Posted September 26, 2021 Thanks Adam. That makes sense… although may be best to repin as that may confuse future mappers! Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.