Bethanyc Posted September 29, 2021 Report Share Posted September 29, 2021 On todays episode of lockdown boredom I have broken my CAN ecu speed channel to the link display. I had implemented this idea in the math channel thread to smooth out the speed output so it bounced around a little less on the display, while works well in the logs it seem to have killed the CAN speed output. i dont know anything about CAN to get that channel working again thanks Beth. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2021 Report Share Posted September 29, 2021 The 4 speeds in AIM are the 4 wheel speeds. So you will need a wheel speed assigned and working in the ecu. Probably best to assign one of the wheelspeed sources to your math block output. Quote Link to comment Share on other sites More sharing options...
Bethanyc Posted September 29, 2021 Author Report Share Posted September 29, 2021 thanks Adam too easy, i wasnt sure where the AIM was getting the 4 ecu speeds from and i had previously just had the gearbox signal DI4 assigned to LF. Sadly no actual wheel sensors in an Evo 6 RS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.