Bananawasp Posted October 11, 2021 Report Share Posted October 11, 2021 HI i have recently bought myself some Phormula knock detection which comes with its own knock sensor. My question is can i use the factory fitted knock sensor or is the knock detection calibrated to its own sensor. i dont have a problem using the sensor thats supplied with the kit but i am limited with fitting location and i would have to remove the factory fitted one to install it. The connector / wire thats on the knock detection is the same as my factory fitted one. Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 11, 2021 Report Share Posted October 11, 2021 Should be fine in most cases. Quote Link to comment Share on other sites More sharing options...
Bananawasp Posted October 11, 2021 Author Report Share Posted October 11, 2021 Thank you. I guess the sensor is effectively just a microphone so it's shouldn't really matter but thought I'd ask the question from someone in the know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.