arbartz95 Posted October 15, 2021 Report Share Posted October 15, 2021 I'm guessing I've missed it, but I could not find any documentation around the interface circuit surrounding the Analog Inputs on a FuryX. At a minimum I'd like to know what the pull down (or pull up, but I'm guessing only the Temp inputs are pull up) resistance is for the inputs. Idea is that if I have a sensor which has a larger than 5V output range, I could add a single series resistor if I know the internal pull down resistor and create a divider. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 16, 2021 Report Share Posted October 16, 2021 You will need two resistors if you need to divide the voltage to be measured. The analog inputs only have a 1Mohm pulldown. arbartz95 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.