Jump to content

K20 VTC help


Recommended Posts

Finally got my car running today, I'm using a pnp civic 95 link g4+ to run the k24. 

I've wired the vtc solenoid to AUX3 which is pin A15, originally for a/c clutch

The vtc is 2 wire and the other wire goes to earth. I've tried testing the signal with laptop and it will be 12v normal on VVT cam solenoid

Test (pwm) it will drop down to around 5v or so fluctuating and test (on) will go to 0v


To me this seems the wiring is correct and maybe its the vtc solenoid? I'm going to try a friends tomorrow but any pointers and ideally If the wiring is correct as ive described?



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...