Gotty101 Posted November 1, 2021 Report Share Posted November 1, 2021 Hi just a quick confirmation. Ive got a G4X Fury in my car and have speedhut Speedo and Tacho. Im intending to wire them into the spare Ignition outputs i have. The speed hut manual says both the speedo and tacho can be wired the same way with a wire from the ecu with a pullup resistor to 12v. Is this ok to do with the ignition drive? Many thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 1, 2021 Report Share Posted November 1, 2021 Yes, that is fine. If you use an aux output instead you wouldn’t need the pull-up resistor. Quote Link to comment Share on other sites More sharing options...
Gotty101 Posted November 1, 2021 Author Report Share Posted November 1, 2021 Thanks loads Adam for the quick reply. Trev Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.