sokratis Posted November 2, 2021 Report Share Posted November 2, 2021 Hello , i've red link's help file but the car made 370 whp 2867 on 6 degrees of timing and at 8 is occurring some knock ...so i'm thinking that my trigger offset is wrong...i turn of fuel , i locked timing to 15 and then i use the timing light to see the marks at 15 on the crank while someone is trying to start.This is done with old spark plug cable between the plug and the coil ofcourse.Numbers in the trigger offset seem to be the same that link basemap set...Could someone tell me if i miss something with the calibration of the timing?? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 2, 2021 Report Share Posted November 2, 2021 It would be better to confirm with the engine actually running as you can get some error when cranking due to the erratic cranking speed. Quote Link to comment Share on other sites More sharing options...
sokratis Posted November 2, 2021 Author Report Share Posted November 2, 2021 ok so i'll do everything above with engne running...thanks i'll tell you the results Quote Link to comment Share on other sites More sharing options...
bsh Posted November 3, 2021 Report Share Posted November 3, 2021 Also check in the higher revs and set ignition delay if needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.