INSW20 Posted November 9, 2021 Report Share Posted November 9, 2021 I can select to turn the tables on/off, but can't find the actual tables anywhere. Running modeled multi-fuel with a lambda overlay. What am I doing wrong? Or have I just run out of available tables? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 9, 2021 Report Share Posted November 9, 2021 Yes, you have a max of 30 GP tables in the G4+ INSW20 1 Quote Link to comment Share on other sites More sharing options...
INSW20 Posted November 10, 2021 Author Report Share Posted November 10, 2021 So in order to free up a couple tables, can I set Boost Target axis to Ethanol% on one and Trim Switch on the other? Then set to a single boost target table, since my target doesn't change with rpm. Same with MAP limit tables, combine down to a single table. EDIT: I added the proposed changes. Think this will work in regards to the boost target and MAP limit? 1991 MR2 11.9.2021.pclr 1991 MR2 11.9.2021 - single boost target table.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 11, 2021 Report Share Posted November 11, 2021 There are many options. You could assign all cylinders knock control to a single knock table, you could turn off the 3D IAT trim which is only using 2D. You could turn off fuel trim Cyl 1 which is doing nothing. Warmup enrichment could be done as a single table with Eth on one axis. INSW20 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.