JMP Posted January 8, 2013 Report Share Posted January 8, 2013 Hi Guys, Can anyone see any issues with attempting to run a Subaru EZ30R H6 engine with a V7-9 V44 plugin? I'm looking to change out my current built EJ257 for an EZ30R and it would be great if I didn't have to purchase another ECU and make full-scale wiring changes to make it run. My only real concern is with the Trigger 2 setup on the EZ30R being an optic/hall sensor, with the EJ using a reluctor. Will the V7-9 V44 plugin be able to handle the EZ30R optic/hall sensor on it's Trigger 2 input? Does the top-board in the V44 plugin have a 5/8V output I can wire for the sensor power and is the pullup resistor functional on the plugin for the Trigger 2 input? I plan on adding additional wires to the stock loom for the extra injectors, re-assigning/repinning the Engine Fan trigger to a different output to free up Injector Drive 5 and then wiring the engine-side loom to run waste-spark for the ignition. Also plan to convert it to cable throttle with a PWM idle valve. Any thoughts or input would be appreciated. Thanks Jason Quote Link to comment Share on other sites More sharing options...
Simon Posted January 8, 2013 Report Share Posted January 8, 2013 Triggers will be no problem. Running wasted covers the ignition and some wiring changes will take care of the rest. Quote Link to comment Share on other sites More sharing options...
JMP Posted January 8, 2013 Author Report Share Posted January 8, 2013 Excellent, Thanks for the reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.