Dynodom Posted December 11, 2021 Report Share Posted December 11, 2021 Mininink G4X ECU. Problem: DBW not working Steps done: 1. Drive by wire Setup mode enabled. 2. Throttle calibration (automatic procedure) successfully completed. Butterfly actuator / throttle plate move as intended, during this procedure. 3. Throttle Pedal sensor learned, Error free completed. Runtime values (2x) visible and responding when depressing Pedal. 4. Enabling DWB to ON after learning. 5. Clearing ECU faults. 6. Ignition off .. on ..but throttle actuator does not function at all. Plate sits at 8 degrees. By the way, car is stock wiring, all original. Any ideas? TIA Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 11, 2021 Report Share Posted December 11, 2021 Attach a log and the tune. Quote Link to comment Share on other sites More sharing options...
Bethanyc Posted December 11, 2021 Report Share Posted December 11, 2021 Quiet mode turned on ? Quote Link to comment Share on other sites More sharing options...
Dynodom Posted December 12, 2021 Author Report Share Posted December 12, 2021 16 hours ago, Bethanyc said: Quiet mode turned on ? Yes. It is there by default for the Mini from Link. Are you saing, quiet mode disables E-Throttle? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 12, 2021 Report Share Posted December 12, 2021 Quote Link to comment Share on other sites More sharing options...
Dynodom Posted December 12, 2021 Author Report Share Posted December 12, 2021 Thank you Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.