INSW20 Posted February 11, 2022 Report Share Posted February 11, 2022 Is there any way to get better high-temperature resolution for setting an axis on one of my engine protection limiters? If I try to set any axis marker between 248F and 302F it defaults back to either. EDIT: Here's what I came up with that I think should get me about where I want to be, and I can adjust how steep I want the dropoff after about 270F by adjusting 248F column up, and 302F down. My primary rev limiters are 7400. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 11, 2022 Report Share Posted February 11, 2022 I think there is something fishy going on with the units conversion - all tables use native °C units in the background, just PC Link converts it for display. Temporarily set your temp units back to C then set up your axis and change back. You should be able to go as fine as 1°C increments. Quote Link to comment Share on other sites More sharing options...
INSW20 Posted February 11, 2022 Author Report Share Posted February 11, 2022 Yep, that works. I have to set the axis in C, and then I can revert back to F and as long as I don't try to change anything between 248 and 302, it works fine so far. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.