dohctor Posted March 31, 2022 Report Share Posted March 31, 2022 Hello link team, requesting troubleshooting steps . I have a hc96+ connected to b18c1 engine loom for 1996 honda integra sir. All analogue volt and temp senors are showing "OK" status on run time menu. However , while my ect sensor on AN temp2 channel is showing realistic coolant temp of around 26 degrees. my IAT senor on AN temp 1 channel is showing 150 degrees C. worryingly , there is no error codes thrown by the ecu and the temp reading remains at 150 even when i disconnect the IAT sensor from the loom. Let me know if you need any further info Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 31, 2022 Report Share Posted March 31, 2022 Attach a copy of your tune Quote Link to comment Share on other sites More sharing options...
dohctor Posted March 31, 2022 Author Report Share Posted March 31, 2022 HI, Thanks for your response , but i worked it out, i had the IAT plug incorrectly plugged into the knock sensor. (just running pre-checks before i start the motor). picking up correct temp readings now that i have swapped the plugs around On a seperate note , what to do you mean my attach copy of tune?.. is that a file--> save as and the attach the saved file, or ecu log export (assume the former) i would like to raise another problem i am having with my map sensor , would like to attach my tune for that Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 31, 2022 Report Share Posted March 31, 2022 12 hours ago, dohctor said: what to do you mean my attach copy of tune?.. is that a file--> save as and the attach the saved file Yes, the tune, calibration or map is the configuration file for the ecu. It will have a .pclr file extension with a G4+ Quote Link to comment Share on other sites More sharing options...
dohctor Posted April 1, 2022 Author Report Share Posted April 1, 2022 thank you for the clarification Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.