buriedalive Posted April 18, 2022 Report Posted April 18, 2022 Installing into a GTIR and I can't get the internal MAP sensor to even come close to the BAP. Have tried blowing in the hose even but its still miles off. Of course the calibration fails every time. Car has not been run. Where am I going wrong? Quote
Adamw Posted April 18, 2022 Report Posted April 18, 2022 Depending on the age of the ecu it may have a 4bar or 7bar map sensor. Sounds like it is set to the wrong cal. Quote
buriedalive Posted April 18, 2022 Author Report Posted April 18, 2022 Spot on. Thanks Adam. I had assumed the box would say if it has a 7-bar Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.