Jump to content

Can the G4X FuryX transmit Fuel Via CANBUS


NLVS

Recommended Posts

yes, sorry shouldn't have written digital signal. it is a analog signal between 0-5v. And no the factory fuel gauge is not present. Using AIM MXP Strada dash. id like to send the fuel level via CanBus from the Link Fury to dash. 

 

Link to comment
Share on other sites

If the factory fuel gauge has gone then Im doubtful it will work without a pull-up added.  Usually the pullup is done by the factory gauge.  But to answer your question, the ECU can take a 0-5V signal as fuel level and send it to the dash.  It will need custom CAN set up at both ends.  You can also just wire the fuel level direct to the dash if you have enough analog channels.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...