Biased Opinion Posted May 26, 2022 Report Share Posted May 26, 2022 I have just been mapping out the changes i need to make to my harness and where I intend to add to the expansion loom and it seems that Ign 8 and An Voltage 7 have no pinouts on the S15 Plugin G4X. I Know that Aux 9 and Aux 10 for DBW are not exposed by default on this ECU, is this just another case of no pins left so there is no output for it S15 Wiring.xlsx Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 26, 2022 Report Share Posted May 26, 2022 Correct those IO are not connected to any externally available pins on that ecu. Quote Link to comment Share on other sites More sharing options...
Biased Opinion Posted May 26, 2022 Author Report Share Posted May 26, 2022 Is it possible to access these outputs via the same method as Aux 9 and Aux 10 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 27, 2022 Report Share Posted May 27, 2022 Possibly, you would have to contact tech support on that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.