Jump to content

EVO3X to 300OGT Turbo (3 connector ECU)


soondin

Recommended Posts

I've check wiring with mitsubishi service manual and EVO3X manual

Ask is Injector 5 and 6 used AUX on EVO3X is it okay use  to 3000GT's injector 5 and 6?
Injector 6 looks like join pin 16 and 21 at EVO3X manual.

I wonder other EVO3X pins connected together.

Ignition3 can use igntion drive. (wonder have some pull up or down)
As many as I know this car have external ignitor.

 

Link to comment
Share on other sites

Yes Ign 3 can be used as a normal ign output and Inj 5 & 6 can be used as normal injector drives.  Inj 6 is connected to 2 pins, so make sure you only have a wire connected to one of those pins after wiring modification.  

Link to comment
Share on other sites

  • 3 weeks later...
On 7/13/2022 at 4:36 AM, Adamw said:

Yes Ign 3 can be used as a normal ign output and Inj 5 & 6 can be used as normal injector drives.  Inj 6 is connected to 2 pins, so make sure you only have a wire connected to one of those pins after wiring modification.  

Were any changes made to the boards to fix this?

Link to comment
Share on other sites

3 hours ago, pugsparked said:

Were any changes made to the boards to fix this?

This is two different subjects.  This post that you are replying in was asking if inj 5 & 6 can be used for a 6 cyl engine, the answer is yes.  The other post that you link to is about DI3 and Ign 4 which control the hold power circuit in the car and cant be used for other functions.  

There have been no changes to the Evo3 bottom board.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...