BURGESS.DJ Posted August 31, 2022 Report Share Posted August 31, 2022 Hi I have a question in regards to an old post on this forum I have a bosch 3 wire idle solenoid I will be using for an antilag bypass to intake manifold the ecu is for a subaru v9 wrx sti plug in so the normal outputs for an open closed function are not available and not interested in repinning etc as car will likely be reverted to factory ecu at some point in its life. Anyway on the plug in aux 8 9 and 10 are free through the xs loom on the mentioned post Link Adam added a diagram for a circuit to run a 3 wire solenoid with 1 aux output I'm wondering if this is still relevant for the g4x as this would be the ideal solution as we allready have the solenoid plumbed ready for wiring. Thanks 3_Wire_ISC_with_1_Aux (1).pdf Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 31, 2022 Report Share Posted August 31, 2022 Yep, that would work. Otherwise you can get the same valve in 2 wire version. Quote Link to comment Share on other sites More sharing options...
BURGESS.DJ Posted September 1, 2022 Author Report Share Posted September 1, 2022 Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.