streetenergy Posted September 1, 2022 Report Share Posted September 1, 2022 Hi ! Im tune many cars for drifting on Link Fury X and last time i have some problems. We use Link fury X + PDM Edash + Keypad Edash 1) Some times Link dont starting.... I mean power chanel is on but link dont start anyway____ Turn ignition off and on is ussualy help but its not good for race car 2) After last update link dont chenge the Ignition angle when engine is knocking but in log is some knock i-trims Just now, streetenergy said: Hi ! Im tune many cars for drifting on Link Fury X and last time i have some problems. We use Link fury X + PDM Edash + Keypad Edash 1) Some times Link dont starting.... I mean power chanel is on but link dont start anyway____ Turn ignition off and on is ussualy help but its not good for race car 2) After last update link dont chenge the Ignition angle when engine is knocking but in log is some knock i-trims s15 vq30det 25.08.22 nring.rar Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 1, 2022 Report Share Posted September 1, 2022 30 minutes ago, streetenergy said: After last update link dont chenge the Ignition angle when engine is knocking but in log is some knock i-trims This is normal and expected behavior. Knock trims are only applied to individual cylinders so dont affect the "Ignition Angle" parameter. This is the commanded value before knock trim is applied. 36 minutes ago, streetenergy said: Some times Link dont starting.... I mean power chanel is on but link dont start anyway____ Turn ignition off and on is ussualy help but its not good for race car Can you give a little more info about this. Does the laptop connect when this happens? Is the blue power light on? Is RPM displayed in software or on the dash when cranking? Is the fuel pump running? Quote Link to comment Share on other sites More sharing options...
streetenergy Posted September 1, 2022 Author Report Share Posted September 1, 2022 Laptop dont connected Blue light is off no connecting anyway About i-trim i anderstand - thanks on more problem : some ecus dont updating______ while i try to update it , ecu try it but only makes clicking sounds all our cars have the same config of wiring and same ecus but some are fine , some dont updated and almost all have a problem with start up Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 1, 2022 Report Share Posted September 1, 2022 If the blue light is off it would suggest the ecu doesnt have power. Is the fuel pump controlled by the ecu? If so, do you hear the fuel pump run? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.