RDantinne81 Posted September 12, 2022 Report Share Posted September 12, 2022 Does anyone have some experience on wiring an Arctic cat Z1 1100 engine into Polaris Rzr chassis. I have sourced all my sensors but am not seeing any info specific to my build in the help section. Ive wired the wideband and the knock sensor in. That was very easy. As for the E throttle, Ive located the motor connections but the remaining wires to throttle body im having trouble with. I see fps main and sub at the ecu but on the tb side im seeing Poti 1, 2 and Poti + and -. Im using the bosch PST-F multi sensor for my engine oil temp and pressure (located at original oil press location), and fuel temp and press (located at the fuel filter housing). Any advice on the wiring of these would be appreciated. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 12, 2022 Report Share Posted September 12, 2022 My guess would be Pot1 = TPS main, Pot2 = TPS sub, + is 5V and - is sensor gnd. Quote Link to comment Share on other sites More sharing options...
txrzrZ1 Posted October 30, 2022 Report Share Posted October 30, 2022 I didnt think the Z1 had e-throttle? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.