Maneet Posted September 18, 2022 Report Share Posted September 18, 2022 Link FuryX Ecu. Having troubles getting the ECU to read a 12V switch input on DI7 or DI8. I have spliced a 12V switch signal from the wiper stalk. Multimeter confirms a 12V signal on the input wire headed towards the ECU. I have attached the factory stalk wiring diagram, I have spliced to the WHT/BLK wire. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 18, 2022 Report Share Posted September 18, 2022 How is the DI setup? What is the voltage on the DI pin with wiper on and off? Quote Link to comment Share on other sites More sharing options...
Maneet Posted September 18, 2022 Author Report Share Posted September 18, 2022 4 hours ago, Adamw said: How is the DI setup? What is the voltage on the DI pin with wiper on and off? Voltage on the DI pin when the wiper is on = 12V. When the wiper is off = 0V Here is how the DI is set up. Quote Link to comment Share on other sites More sharing options...
Maneet Posted September 18, 2022 Author Report Share Posted September 18, 2022 Tried it out this morning and it started working.. odd.. Well thanks anyways. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.