jumpboy23 Posted September 22, 2022 Report Share Posted September 22, 2022 Hello all, I have attempted my first start a few times but the engine is only cranking and wont turn over. I have downloaded the G4x 350z 7bar base map and have e-throttle 1. I ran an injector test and am positive the injectors are fine. I also can confirm that I hear the fuel pump prime when I put the key on ignition. Before I pull my plugs for an ignition test is there anything else I need to enable for first start? Would having larger fuel system than stock affect a start up on the base map? I have attached a log of it cranking in case it helps anyone solve this issue. PC Datalog - 2022-09-22 7;29;43 pm-first start attempt.llgx Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 22, 2022 Report Share Posted September 22, 2022 log shows a dip in manifold pressure but no triggers. Have you unlocked the ECU? Can you take a Trigger Scope while cranking? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 23, 2022 Report Share Posted September 23, 2022 The other thing you may need to do for the G35 is set the "allow CAN Anti-theft request" to off. Chassis & Body > Anti Theft. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.