merctec Posted October 10, 2022 Author Report Share Posted October 10, 2022 After reviewing all the parts associated with the trigger system having changed source, and the wiring for the power supply and earth and the shielded sensor cables replaced both triggers including the trigger wheel as was slightly outside the sensor spec Iam back where i was when i first raised the topic on the forum in PC Link and Firmware 620 That there is an issue with the Monsoon G4X Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 10, 2022 Report Share Posted October 10, 2022 Can you give us some fresh logs of it cranking, a trigger scope and a capture from the standalone scope if you can. What symptoms do you have? Quote Link to comment Share on other sites More sharing options...
merctec Posted October 10, 2022 Author Report Share Posted October 10, 2022 Called the Brisbane Tech line today emailed them some stuff from today would have to arrange access to the pico scope for the standalone symptoms today are cranks starts runs cuts out running time changes 2min 10min or more today would run cut out re start run cut out if you try to raise engine speed sometimes cuts straight out others will rev up just before it cuts out trigger 1 on runtime goes to no, trigger 2 still ok Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.