MichaelR32GTR Posted October 15, 2022 Report Share Posted October 15, 2022 Hey guys I want to add afew more psi boost to my tune, it currently holds around 34/35psi from 6000rpm to redline having a look at my wastegate duty% table the duty% in the 350kpa line from 6000rpm onwards is around 22-24% duty. the next line is 370kpa but the values (between around 20-22%duty) are less then those in the 350kpa line my question is, shouldn’t the duty be higher as it makes higher boost, is the lower values in 370kpa just to stop it over boosting or going over 350kpa or is that perfectly normaly Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 15, 2022 Report Share Posted October 15, 2022 Yeah is fairly common to put MAP on one axis and drop the DC in the cells above your desired boost so you get a form of very basic proportional control. Easiest thing for you would be to just select the whole table and hit "+2" or whatever to add 2% to all values in the table. Quote Link to comment Share on other sites More sharing options...
MichaelR32GTR Posted October 15, 2022 Author Report Share Posted October 15, 2022 Ok thanks for that I will give that a try and see so no real need to the 370kpa line values higher then 350kpa Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.